This series of horizontal boring milling machines in the basis on the traditional horizontal boring milling machine to optimize the design, the machine tool is a fixture of the case for drilling, reaming, boring, reaming, milling and turning thread, etc. At the same time machine tool with a rotating flat spin dish, flat spin on the plate in the slider rotating flat spin when radial to get into can cut the size of the larger boring hole, the car round, flat, and the cutting processing
Features
Spindle system — strong rigidity
Bed, column and upper slider, all using rectangular guide
At the end of the spindle box, there is flat spin dish radial the frame which can be used as radial processing.
Moving components are able to move fast
The safety device will be off automatically when the machine is overload feeding in order to avoid destroying the workpiece and tools.
Specification
| Specification | TPX6111B/3 | |
| Spindle diameter | 110mm | |
| Max. torque of spindle | 1225N.m | |
| Max. torque of radial slide | 1960N.m | |
| Max. axial thrust of spindle | 12250N | |
| Spindle taper | MT6 (Optional: ISO50 7:24) | |
| Worktable size (L×W) | 1600X1300mm | |
| Worktable travel | Longitudinal (Z) | 1400mm |
| Cross (X) | 1600mm | |
| Distance from spindle center line to worktable surface | Max. (Y) | 1200mm |
| Min. | 0mm | |
| Max. travel of spindle | 600mm | |
| Max. travel of radial facing slide | 180mm | |
| Max. permissible load of table | 3000kgs | |
| Speed number of spindle | 22 steps | |
| Speed range of spindle | 8-1000r/min | |
| Speed number of radial facing slide | 18 steps | |
| Speed range of radial facing slide | 4-200r/min | |
| Rapid traverse speed of spindle, headstock, cross & longitudinal saddles | 2500mm/min | |
| Rapid speed of rotary table | 1r/min | |
| Feed number of spindle, headstock, and table per spindle revolution | 18 steps (H/L speed) | |
| Feed steps of radial slide on facing head, headstock, cross & longitudinal saddles per facing head rotation | 18 steps | |
| Feed range of radial slide on facing head, headstock, cross & longitudinal saddles per facing head revolution | 0.08-12mm | |
| Feed range of spindle, headstock, cross & longitudinal saddles per spindle revolution | When spindle speed is 8-400r/min | 0.04-6mm (0.0016-0.2362″) |
| When spindle speed is 500-1000r/min | 0.01-1.88mm (0.0004-0.074″) | |
| Reading accuracy of measuring system | Metric | 0.005mm |
| Inch | 0.0005″ | |
| Boring accuracy | IT7 | |
| Roughness of boring hole | ||
| Boring diameter (Distance between spindle nose and tool tip ≤450mm) | ∅50-∅240mm | |
| Main motor power | 7.5kw | |
| Rapid motor power | 3kw | |
| Overall dimension (L×W×H) | 5117×3359×3079mm | |
| Machine weight (approx) | 17000kg | |
Motor
Spindle-&-Rotating-Disk
Machine Details
